No record of what’s actually certified
A certificate gets issued on site, then lives on a phone or in a drawer. When a client or insurer asks for proof, you’re chasing paper instead of producing it.

Electrical maintenance
Electrical maintenance runs on certificates. EICRs, PAT records and emergency lighting logs sit in vans, paper folders, and email threads, so nobody in the office can say which sites are due, which engineers hold the right ticket, or what’s actually been signed off.
Joblogic gives electrical contractors, compliance managers, and schedulers one record for every EICR, PAT test and emergency lighting check, matched to the engineer qualified to do the work, so certificates get renewed on time and every completed job reaches an invoice.
Certificates go missing, engineers get sent to jobs they’re not qualified for, and invoices lag behind the work.
A certificate gets issued on site, then lives on a phone or in a drawer. When a client or insurer asks for proof, you’re chasing paper instead of producing it.
A job needing an 18th edition sign-off goes out to whoever’s free, not whoever’s qualified. You find out it needs redoing when the client calls back.
A customer rings to ask if the engineer’s on the way and the office genuinely doesn’t know. Every call becomes a search through someone else’s diary.
An engineer flags remedial work on the EICR, the job closes, and the extra work sits unbilled because nobody carried it through to an invoice.

Pull EICR, PAT and emergency lighting records for any site in minutes, not by working through vans, drawers, and old emails.

Match jobs that need a specific ticket or accreditation to the engineers who actually hold it, so certified work doesn't need doing twice.

Know where every engineer and every job stands across every site, so the answer to where's my engineer doesn't start with a search.

Carry remedial findings from the certificate straight into the invoice, so extra work gets paid for instead of written off.

Keep the certificate trail intact even when subcontractors or freelance engineers cover the work, so liability doesn't land back on you unproven.
See compliance, scheduling, and invoicing for every job from one place, whatever the site or the ticket needed.
Engineers complete the EICR, PAT, or emergency lighting form on the mobile app as the job closes, tied to the asset and site, so the record exists straight away.
Jobs needing a specific certification route only to engineers holding it, checked against their profile at the point of allocation, so certified work goes out right the first time.
Every job’s status updates live as the engineer works through it, so the office sees progress across every site without calling round to check.
A completed job, including any remedial work flagged on the certificate, converts to invoice without a separate step, so extra work stops disappearing between the job and the bill.
Certificate status, job progress, and invoicing sit on one dashboard across every site you cover, so adding sites doesn’t mean losing sight of any of them.
Every EICR, PAT result, and emergency lighting test is logged against the asset and the site the moment the engineer signs it off, not written up later.
When an insurer, landlord, or client asks for proof tomorrow, not next quarter, you pull the record instead of piecing one together from vans and paper.

We’ve slashed job-related man-hours by 50% with Joblogic. Every job is now monitored, processed, updated, and invoiced in half the time, doubling our operational efficiency.
Who this touches depends on how big your operation is. A five-person electrical contractor runs certificates, scheduling, and billing through one person; a specialist contractor running twenty vans splits it across a full team.
The certificate that proves the business is compliant exists the day the work happens, not the day an insurer or a client asks to see it.
See how it works for ownersJobs needing certified work only go to engineers who hold the right ticket, so the schedule doesn’t create compliance problems it then has to fix.
See how it works for operationsRemedial work flagged on a certificate carries straight through to the invoice, so completed jobs stop sitting unbilled while the paperwork catches up.
See how it works for finance leadersEngineers cover several sites a day, and the van carries its own cost and compliance risk. Joblogic tracks vehicle location, mileage and MOT dates against every job the van serves.
See how it works for fleet managersConsumables and components ride in every van, and manual reordering stops scaling past a handful of engineers. Joblogic ties parts cost to the job and reorders on a threshold, not memory.
See how it works for stock managersAcross Joblogic customers, 80% of engineers use the mobile app day to day, a cross-vertical figure rather than one exclusive to electrical work. On site, that means the EICR, PAT result or emergency lighting log gets completed on the phone already in the engineer’s pocket, not written up later at the office. That’s the adoption question answered before it’s asked.

Works with the accounting and compliance tools you already use, and scales as you add sites and engineers.
Connects to Xero, Sage, and QuickBooks, so job costs and invoices flow through without re-keying figures by hand.
Set up each site and client contract once, with its own certificate schedule, and add more without rebuilding what’s already running.
Certificate and inspection records map to the standards your engineers actually work to, not a generic compliance category that doesn’t name them.
Yes. Every EICR, PAT, result and emergency lighting test is logged against the site and the asset, with renewal dates tracked automatically. You see what’s due, what’s overdue and what’s just been completed, across every site you cover, without checking each one by hand.
Yes. Jobs that need a specific ticket or accreditation are matched against what each engineer holds on their profile, so unqualified engineers don’t get sent to work they shouldn’t do. It stops the redo, and the risk, before the job goes out.
It’s built to run any electrical job you take on. Certificates, forms and job types are configured to your work, whether that’s EICRs, PAT testing, emergency lighting, or fault-finding, not fixed to gas or HVAC workflows by default. You configure it around the certificates your business actually issues.
No, most contractors move certificate by certificate and site by site rather than in one cutover. Historical records can be imported, and your team keeps working through the transition instead of stopping to switch systems. A named contact runs the plan with you.
Yes. Subcontracted or freelance engineers get access scoped to the jobs and sites you assign them, so they can log certificates and job completion without seeing the rest of your account. The certificate trail stays yours even when the hands doing the work aren’t your direct employees.
Both. Most electrical maintenance customers start small, often a handful of engineers covering EICR and PAT work. The same certificate, scheduling and invoicing structure holds as you add sites, engineers ,or subcontractors, without needing to move to different software. It’s the same system throughout.
Thirty minutes on your own patch: how certificates track against every site, how jobs match to the right engineer, and how remedial work turns into an invoice without a second step.