No single record of what’s installed where
You know the cameras, panels, and readers are out there somewhere, but the full list per site lives across three systems and one engineer’s memory.

Security
CCTV on one site, access control on another, and intruder alarms across dozens more, all on different testing cycles. Keeping track means juggling spreadsheets, inboxes, and memory, and a missed test only shows up when a client asks for the certificate.
Joblogic brings every site, asset, and test into one place. You can see what’s due, send the right engineer, and store the certificate the moment the job’s done, so you’re never chasing paperwork after the fact.
The systems are different, but the same schedule and the same missing certificate cause the same problem.
You know the cameras, panels, and readers are out there somewhere, but the full list per site lives across three systems and one engineer’s memory.
A quarterly intruder alarm test or access control audit gets missed, and nobody finds out until the client’s insurer asks for the log.
A tenant reports a fault, an insurer wants the last test date, or an auditor asks for certificates, and someone spends the afternoon searching instead of sending a link.
Whether it’s your own team or a subcontracted engineer, you find out a test was actually done, and what it found, whenever the paperwork happens to reach the office.

Turn certificates, test logs and PPM history into an export the moment an insurer, inspector or client's auditor asks for it.

Give subcontracted engineers scoped access so a missed test or an expired certificate surfaces to you before it becomes your liability.

Log a test result and a photo from site once, and the certificate, invoice and audit record all update from that single entry.

Give clients and their auditors their own portal login, so they check certificates and test dates themselves instead of ringing you.
Every camera, panel, and alarm across every site sits in one record, tested, logged and ready to show.
Every camera, panel, reader, and control unit sits on one asset record per site, so what’s installed, where, and its full service history are one search away.
Testing schedules for alarms, access control, and CCTV generate automatically from the asset record, so the next due date shows up before it’s overdue, not after.
Clients and their auditors log in to their own certificates, test records and site history directly, so proof of compliance stops depending on someone finding the file.
Subcontracted engineers log test results, faults and photos through scoped access, so you see what was tested and what it found without waiting on a phone call.
One dashboard rolls up testing status, SLA risk and certificate expiry across every site and every contract, so the portfolio view is a screen, not a spreadsheet you build monthly.
Every alarm test, access control check, and CCTV inspection is logged against the asset and the engineer who did it, timestamped and stored in one compliance record per site.
When the insurer, the police or the client’s auditor asks for the last test date, you send the record straight from the system. No scramble, no gap to explain.

We used to use Alarm Master for 15 years or more before deciding we needed a cloud-based system. Joblogic is first class. Very good for us.
Who this touches depends on how big your operation is. A two-person alarm and CCTV installer runs everything through one person; a national security servicing provider splits it across a full team.
You install, test and invoice the work yourself. Joblogic keeps testing schedules, certificates and invoicing straight even when you’re the only one running all three.
See how it works for ownersYou schedule alarm tests, access control checks and CCTV inspections against one asset record per site, so nothing slips past its due date and nobody’s chasing yesterday’s paperwork.
See how it works for service managersA completed test or callout turns into an invoice the same day, with parts and labour attached, so cash doesn’t sit waiting on paperwork someone forgot to send in.
See how it works for finance leadersYou walk into contract renewal needing months of testing records and SLA performance across every site, not a scramble. Joblogic builds that record automatically, contract by contract.
See how it works for contract managersYour engineers test alarms and access control alone, often out of hours. Joblogic’s lone worker safety lets them check in and raise an alert, while every certification stays flagged before it lapses.
See how it works for HR managersAcross the Joblogic customer base, 80% of engineers use the mobile app daily, a cross-vertical figure, not security-specific. For CCTV, access control, and alarm engineers, that means logging a test result or a fault from site, not writing it up back at the van. It gets used because it’s faster than paper, not because anyone was told to.

Works with the accounting system you use today and scales as sites, contracts, and monitoring relationships grow.
Connects to Xero, Sage, and QuickBooks, so completed tests and callouts turn into invoices without a second data entry pass.
Structure the account around sites, contracts, and client portfolios, the way your business is actually organised, not a single flat customer list.
Testing schedules and certificate records are built around NSI and SSAIB requirements, so your evidence lines up with what an accreditation inspector expects to see.
No. Joblogic manages your engineers, jobs, testing schedules, certificates, and invoicing, not live alarm monitoring or signal receiving. If you run or work with an ARC, that stays a separate specialist system; Joblogic sits alongside it for the service and compliance side of the business, not in place of it.
Yes. Every system type sits on the same job and asset structure, so a site with CCTV, access control, and an intruder alarm has one schedule and one record, not three separate systems to check before you can answer a question about any of them.
Yes. Subcontracted engineers get access scoped to the jobs and sites you assign them, so they log test results, faults and photos on-site without seeing the rest of your account, your pricing or your other clients’ data.
Yes. Every site carries its own testing schedule and certificate history, so a portfolio of ten sites or two hundred shows the same view: what’s due, what’s overdue, and what’s already proven, without you rebuilding the picture site by site.
Both. The same site, testing and certificate structure holds whether you’re running a handful of contracts or managing security across a large multi-site portfolio, so growth doesn’t mean rebuilding how compliance gets tracked and proven.
Yes. Clients and their own auditors can log in directly to pull the current certificate or test record themselves, instead of ringing your office and waiting for someone to find the file.
Thirty minutes on your sites: one asset record for every camera, panel and alarm, testing schedules that flag themselves, and certificates your clients can pull without calling you.