engineer on site inspecting | Joblogic

Food and beverages

Lines running. Hygiene proven. Audits ready.

In food production, a failed audit can cost you more than a broken line. If your hygiene, temperature, and maintenance records are spread across paper and memory, every audit becomes a scramble.

Joblogic records every service, check, and repair against the right asset as it happens. Your HACCP evidence is always ready, and planned maintenance keeps the lines running between audits.

 

The four problems food and beverage lines can’t avoid

No warning before a line goes down

You find out a packer’s been running rough for weeks when it finally stops the shift, not from a service history that could have flagged it.

Planned servicing lost to firefighting

The unit due an inspection this month becomes next month’s failure, because a breakdown call keeps jumping the queue ahead of it.

Refrigerant work goes to whoever’s free

You find out the engineer on site isn’t F-Gas certified only once they’ve turned up for the refrigerant job, and the callout starts again.

No proof ready when the auditor calls

You rebuild the file from paper and memory when a BRCGS or client audit asks for temperature logs and refrigerant records on one line, instead of just exporting it.

Where food and beverage manufacturing connects to the risk

Laptop on an outdoor table showing the Joblogic job and asset list table with compliance status columns

Turn compliance checks into an export

Produce HACCP records, temperature logs, and refrigerant certificates for any line the moment an auditor or client asks.

Laptop on a desk showing the Joblogic scheduling interface with coloured job cards arranged in a weekly calendar view

Send the right engineer to the failure

Match the callout to whoever's F-Gas certified and nearest to the line, not whoever picks up the phone.

Desktop monitor showing the Joblogic job map view with location pins across a UK map and a job list panel on the right

See every line without a status call

Check job status, refrigeration temperature, and outstanding compliance across every site from one screen, not a round of calls.

Desktop monitor on a desk showing the Joblogic reporting dashboard with multiple donut charts and a bar chart for KPI metrics

Turn downtime into a cost you can see

Track what a stopped line actually costs in lost output and engineer time, so planned maintenance gets budget, not an argument.

Male IT engineer in a blue shirt holding a laptop in a server room with racks of network cables and equipment

Feed maintenance data into your ERP

Pass job, asset and compliance data into the production or ERP system you already run, so nobody re-keys the same record twice.

One system for every line and site

Every asset, every certificate, and every breakdown tracked from fault to invoice in one place.

Stop failures before they stop the line

Every processing line, refrigeration unit, and packaging machine gets its own service history and lifecycle record, so replacement gets planned before it fails mid-run.

Planned checks that don’t get bumped

PPM rounds sit alongside emergency callouts in the same schedule, so a refrigeration check due this week doesn’t get bumped every time a line breaks down.

Send the right engineer, first time

Jobs match to engineers by certification and proximity, so an F-Gas job goes to someone qualified for it, not just whoever’s free.

Pull refrigerant records on demand

Refrigerant records, temperature logs, and hygiene checks attach to the job and the asset as the engineer completes the work, ready to export the moment an auditor asks.

See every site from one screen

Build one view of compliance, uptime, and margin across every production site, so a national contract doesn’t mean losing sight of any one line.

Every reading on record

Refrigerant handling, temperature readings, and hygiene checks attach to the job and the asset the moment the engineer finishes, held in one system, not a clipboard in the plant.

When a client's compliance audit or an environmental health inspection asks for temperature and refrigerant records across a site, you export the history instead of rebuilding it from memory.

Joblogic reporting dashboard on a computer | Joblogic

Proof, not a pitch

When we took on Joblogic, our turnover was about £22 million. This year it’ll be £65 million, and we’re aiming to reach £100 million within five years.

James LaphamDirectorDayla Limited
90%customer satisfaction across the Joblogic platform, not sector-exclusive
80%of engineers use the mobile app day to day, cross-vertical
99.99%platform uptime guarantee, not sector-exclusive

What this means for your team

Who this touches depends on how big your operation is. A five-person refrigeration contractor runs everything through one person; a national food and beverage maintenance group splits it across a full team.

Business Owner

You run engineering, compliance, and admin yourself. Joblogic keeps F-Gas certificates, temperature logs, and service history straight even when you’re the only one keeping track of them.

See how it works for owners

Operations Manager

You see line status, refrigeration temperature, and engineer certification across every site from one screen, instead of ringing round the plant to find out what’s running.

See how it works for operations

Finance Manager

You see what a stopped line actually cost in lost output and engineer time, so the budget case for planned maintenance isn’t a guess anymore.

See how it works for finance leaders

Fleet Manager

You dispatch engineers to refrigeration failures across a national network of plants, and need to know which vehicle is genuinely nearest. Joblogic puts vehicle location and job status on one screen.

See how it works for fleet managers

HR Manager

You carry the risk if an uncertified engineer is sent to a refrigerant job. Joblogic flags a lapsed F-Gas or hygiene certificate before the job is booked, not after.

See how it works for HR managers

Engineers log it on the line, not back at a desk

Across the Joblogic customer base, 80% of engineers use the mobile app day to day, a cross-vertical figure not yet measured for food and beverage production specifically. On the line, engineers log temperature readings, capture refrigerant and hygiene records, and close out the job before leaving the plant. That’s the adoption test: the tool disappears into work engineers were doing.

Joblogic mobile app being used on site | Joblogic

Fits the systems you already run on site

Connects to the accounting and production systems you already use, and scales from one site to a multi-plant network.

Accounting and ERP systems

Integrates with accounting platforms including Xero, Sage, and QuickBooks, alongside API access for production and ERP systems where a connection is scoped and built.

Sites, plants and facilities

Team structures and permissions split by plant, facility or production site, so reporting stays accurate as the business adds locations.

HACCP, BRCGS and F-Gas

Tracks HACCP and BRCGS-aligned checks alongside F-Gas certification per engineer and asset, so a client or auditor’s request becomes an export, not a search.

Food and beverages questions

Is this for the food producer, or who services their kit?

This page is written for businesses that service and maintain equipment inside food and beverage manufacturing and production facilities: processing lines, refrigeration, and packaging equipment. It’s built for the servicing engineer or contractor, not the food producer’s own production software.

Does this cover processing, refrigeration and packaging?

Yes. Job management, scheduling, compliance and invoicing work the same way whether the job is a processing line repair, a refrigeration service or a packaging machine breakdown. Asset records track each piece of equipment separately, so a site running all three doesn’t need three different systems to keep track of them.

How do we prove HACCP compliance across sites?

Every temperature reading, refrigerant record and hygiene check attaches to the engineer, the asset and the site as the job is completed. When a client or auditor asks for the compliance history on one site or every site, you export the record instead of chasing paper checklists and old service sheets.

Can subcontracted engineers work on our lines?

Yes. Subcontracted engineers get a portal scoped only to the jobs and sites you assign them, so they log completion and compliance evidence without seeing your other clients, your commercial terms or the rest of your operation. This keeps one production site’s compliance record separate from another’s.

Does this scale from one site to a national group?

Yes. The same job, compliance and invoicing structure holds whether you’re running one production facility or a national group across multiple sites. Team structures and permissions split by site, region or business unit as the estate grows, so oversight doesn’t get harder as the client or site list does.

How do we stop planned checks being pushed out?

Planned maintenance and emergency breakdowns sit in the same schedule, not two systems competing for the same engineer. A reactive callout gets slotted in without silently cancelling the refrigeration or hygiene check due that week, so planned work stops quietly disappearing every time a line breaks down.

Will this replace our production or ERP system?

Not usually. Joblogic connects to accounting platforms including Xero, Sage, and QuickBooks, and API access is available for production or ERP systems where a connection is scoped and built. It doesn’t replace line-level production control software; it sits alongside it for maintenance, compliance and invoicing.

See it across your production sites

Thirty minutes on your plant: HACCP and refrigerant records ready for any auditor, breakdowns dispatched to the right certified engineer, and every line visible from one screen.