No single record of what’s installed where
You know a heat pump or solar array went in three years ago, but finding the model, serial number, and commissioning date means digging through an old paper file.

Energy services
Solar, heat pump, and EV charger installers juggle new installs against the fault callouts and services that follow for years, while MCS certification, grant scheme evidence, and warranty records pile up per site with no shared record of what’s actually out there.
Joblogic gives installation managers, compliance leads, and service coordinators one system for every solar, heat pump, and EV charger install, its certification trail and its service history, so a grant auditor or a homeowner gets an answer in one export, not a scramble.
Installs, certifications, grant evidence, and service history all live in different places until someone needs all four at once.
You know a heat pump or solar array went in three years ago, but finding the model, serial number, and commissioning date means digging through an old paper file.
An EV charger fault and a scheduled heat pump service both land on the same morning, and whichever engineer is free wins, not whichever job is actually more urgent.
Your own engineers and subcontracted MCS installers all touch the same customer base, but you can’t see who installed what, or whether their certification is still valid.
A funding body or an auditor asks for the compliance bundle behind one install, and pulling together the certificate, assessment, and sign-off becomes a week’s work, not an export.

Produce the certificate, assessment, and compliance bundle behind any install the moment a funding body or auditor asks, instead of rebuilding it from memory.

Schedule new installs alongside reactive faults and scheduled servicing on the same planner, so an urgent callout doesn't bump a job already booked in.

Send installs and refrigerant or electrical work only to engineers who actually hold the right certification, instead of whoever's free that morning.

Pass install, compliance and job data into the funding body or accounting system you already use, so nobody re-keys the same record twice.
Every solar, heat pump, and EV charger install tracked from commissioning to certificate to next service.
Every solar array, heat pump, and EV charger gets its own asset record, model, serial number, and commissioning date included, so history exists the moment it’s installed.
Servicing intervals generate automatically against each system’s own schedule, so a heat pump’s annual service books itself instead of competing with today’s fault callouts.
Subcontracted MCS installers log completions and certification through a scoped portal, so you see who did what and whether their accreditation is still current.
Certification, assessment and grant scheme evidence attach to the job as the engineer completes it, so a funding body or auditor request becomes an export, not a search.
Build one view of install pipeline, service performance, and certification status across every engineer and every subcontractor, and reuse it for every scheme audit.
MCS certification, PAS 2035 assessment records and grant scheme evidence attach to the install and the asset, stored in one system, not a folder on an installer’s laptop.
When the funding body, the MCS assessor, or a homeowner with a warranty claim asks for the record behind one install, you export it, not rebuild it from memory.

Who this touches depends on how big your operation is. A five-person solar and heat pump installer runs everything through one person; a national installer network splits it across a full team.
You run installs, certification and grant paperwork yourself. Joblogic keeps every commissioning record, certificate, and invoice straight even when you’re the only one tracking it.
See how it works for ownersYou see install pipeline, fault callouts, and engineer certification status across every job from one screen, so work goes to whoever’s actually qualified, not just whoever’s free that morning.
See how it works for operationsYou see what each install actually cost against what the grant scheme pays out, so margin per job is a number, not a guess made after invoicing.
See how it works for finance leadersYou walk into a funding body audit or a franchise partner renewal needing a full year of certification and grant scheme evidence, not a scramble. Joblogic builds that record automatically, install by install, partner by partner.
See how it works for contract managersYou manage integrations with accounting systems, permissions across installer branches and regions, and compliance data for MCS and PAS 2035, all from one place, instead of stitching separate systems together for each new partner.
See the roleAcross the Joblogic customer base, 80% of engineers use the mobile app day to day, a cross-vertical figure, not sector-specific. On a roof or beside a charger, engineers log commissioning photos and certification against the job as the work happens. That’s the record a grant scheme or a warranty claim actually needs, captured on site, not written up later.

Connects to the accounting systems you already run, and scales from a handful of installers to a national network.
Integrates with accounting platforms including Xero, Sage, and QuickBooks, so invoicing and job costing don’t need re-keying into a separate finance system.
Team structures and permissions split by installer team, region, or franchise partner, so reporting stays accurate as the network adds installers.
Tracks MCS certification and PAS 2035 retrofit assessment records against the install and the site, ready for the next scheme audit or funding review.
Honestly, we haven’t confirmed this with a solar, heat pump, or EV charger installer yet. Joblogic is built for engineer-led field service work, and the asset, PPM and compliance tools apply directly to install and service work in this sector. Whether it covers scheme-specific submission steps like MCS or PAS 2035 depends on your setup, worth a direct conversation before you commit.
No, and it isn’t meant to. Joblogic manages jobs, engineer dispatch, asset history and the certification records attached to a job once it’s certified. If MCS certification itself runs through separate scheme software, that stays separate; Joblogic is where the finished certificate and its evidence live alongside the job, not where the certification process itself happens.
Yes. Subcontracted engineers and franchise or partner installers get a portal scoped to the jobs and assets you assign, so they can log completion, certification, and compliance evidence without seeing the rest of your business or your commercial data. This works the same way whether the installer is one of yours or a partner’s.
Every certification and grant scheme record attaches to the install and the site as the engineer completes the work, whether that’s one site or a network of them. When a funding body, MCS assessor, or client asks for a site’s record, you export it. This assumes MCS and current grant scheme requirements are the right regime for your business; if yours differ, tell us during scoping.
Both, in principle. The same asset, PPM and compliance structure holds whether you run a small install team or a national network of branches and partners, and permissions split by branch, region, or partner as you grow. We haven’t validated this against a genuinely large, multi-branch energy services operator yet, so treat the largest end of this as an open scoping conversation.
New installs and reactive fault callouts sit on the same planner, so a heat pump breakdown in winter or an EV charger fault doesn’t silently displace a booked install, or the other way round. Planned servicing generates automatically against each system’s own interval, so it books ahead of failure rather than competing with today’s emergency for the same engineer.
Thirty minutes on your install base: certification and service history in one place, engineer dispatch that knows who’s actually qualified, and compliance evidence ready before the scheme asks.